Construction Site Dewatering (e.g. property owners for clearing water from trenches or for maintenance purpose);

 Cellar or basement drainage on buildings;

 Transfer and drainage of stormwater;

 Circulation in decorative waterfalls and fountains;

 Drainage of treated water in water treatment plants

Features:

 Suitable use in water, rain water, ground water, sand carring water, mud carring water;

 An agitator is provided on the end of the pump shaft. The agitator helps prevent air buildup inside the casing and also reduces clogging when solid objects enter the pump.

 Vortex Impeller: It creates a whirlpool pump action. This allows soft solids, stringy material, grey water and light sewage to be pumped.

 Auto Pump - Float switch attached - Pump will stop at low level and can leave the pump unattended opeartion.

 Double mechanical seals -protects against water leakage which shorts out motor.

 High grade bearings for high temperature operation are used. As the bearings are deep grooved and doubled shielded and covered permanently in grease, lubricating oil is not required. That is why Tsurumi's Pump life is lot more life span than other brands

 The pump can run non stop 24/7 without overheating or cutting out.

 Molded "cable boot" extends the bending radius of the power cable preventing kinking and increasing cable life.

 Safety and reliability (Continues rated)

Motor Feature:

 Single phase

 Insulation class: E

 Miniature thermal protectors (MTPs) are built into its motor and integrated in motor windings. The MTP will cut the motor circuit in the event of excessive heat.

 Lubricant: Turbine oil VG32

 Duty: Continuously rated

Technical Specifications:

 Model: HSZ2.75S

 Motor power rated: 1HP

 Voltage: 220-240V

 Frequency: 50Hz

 Capacity: 230L per minute

 Head: 18m

 Outlet: 50mm

 Max solid size: 3/8" (9 mm)

 weight: 17kg

 Rating: Continuous

 Dimension (cm):25X19X39

12 Months Warranty