Design for the following area:
Construction Site Dewatering (e.g. property owners for
clearing water from trenches or for maintenance purpose);
Cellar or basement drainage on buildings;
Transfer and drainage of stormwater;
Circulation in decorative waterfalls and fountains;
Drainage of treated water in water treatment plants
Features:
Suitable use in water, rain water, ground water, sand carring
water, mud carring water;
An agitator is provided on the end of the pump shaft. The
agitator helps prevent air buildup inside the casing and also reduces clogging
when solid objects enter the pump.
Vortex Impeller: It creates a whirlpool pump action. This
allows soft solids, stringy material, grey water and light sewage to be pumped.
CWL (Continuous Water Level) 90mm. Only 90mm of water is
required for the pump to run, reducing the chance of failure at low levels.
This also allows the pump to drain to much lower levels than allowed by most
pumps.
Double mechanical seals -protects against water leakage which
shorts out motor.
High grade bearings for high temperature operation are used.
As the bearings are deep grooved and doubled shielded and covered permanently
in grease, lubricating oil is not required. That is why Tsurumi's Pump life is
lot more life span than other brands
The pump can run non stop 24/7 without overheating or cutting
out.
Molded "cable boot" extends the bending radius of
the power cable preventing kinking and increasing cable life.
Safety and reliability (Continues rated)
Motor Feature:
Single phase
Insulation class: E
Miniature thermal protectors (MTPs) are built into its
motorand integrated in motor windings. The MTP will cut the motor circuit in
the event of excessive heat.
Lubricant: Turbine oil VG32
Duty: Continuously rated
Technical Specifications:
Model: HS2.4S
Motor power rated: 0.4kW
Voltage: 220-240V
Frequency: 50Hz
Capacity: 200L per minute
Head: 12m
Outlet: 50mm
Max solid size: 3/8" (9 mm)
weight: 11.3kg
Rating: Continuous
Dimension (cm):24 X18X35
Come with 1 year warranty
