Electrolux / Westinghouse External Fridge Filter 1458682 Fridge Water Filter DA2010CB 1450970 ELECTROLUX WESTINGHOUSE AND SIMPSON WATER FILTER ESE6078WA

Compatible Filters&Fridge:

External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges replaces : WFCB, WF2CB External in-line Fridge Filter, 1450970 & many other filter part numbers, will fit all brands of fridges that use an external in-line fridge filter. Most fridges with internal filters can be converted over to use these filters.

Suitable for:

External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges

Suits the Following Fridge Models:

ESE6977SC,ESE6977SE,ESE6077SF,ESE6077SE,ESE6077SC,WSE6970SF, WSE6970

Fits the following refrigerators models:

Westinghouse fridge filters

WSE6070PB, WSE6070SB, WSE6070WB, WSE6070WF, WSE6070SF WSE6970WF, WSE6070WF,WSE6970SF

Electrolux fridge filter

ESE6977S, CESE6977SE, ESE6077SC, ESE6077SE, ESE6077SF, ESE6977SF, ESE6077SG, ESE6977SG ,WHE5160SA

THIS FILTER ALSO SUIT FOR PART NUMBER 1456145K OR 00740560,1458682 THIS IS SAME AS ORIGINAL MANUFACTURED PART

Fridge Water Filter Spec:
Installation and replacement procedure for the Compatible External fridge water filter :

1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.

2. . Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.

3. Take the new filter, making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 10mm and you will feel it hit home.

4. Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remove any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.