Compatible Filters&Fridge:

Suitable for:External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges

Suitable for:

Compatible External In-Line Fridge Water Filter DA2010CB, Premium Water Filter for WHIRLPOOL is a suitable replacement for 4378411 and refrigerators that have a filter outside at the back of the fridge or in a nearby cabinet.

Replaces the following filters.

Whirlpool 4378411, Whirlpool WF270, WF/12 WF270, WF001, WF020, WF12, WF270,4378411, WF270, BFFR, BFFRF0.25, BFFRMAX, BFFRS, TRU501, BFFR, BFFRF0.25, BFFRLG, BFFRMAX, BFFRS, BFFRSED, GILF1025, GT1-73, GT6-1 Fridge Filter, GILF1025, GT6-12, RFWH050, 2890JC2990A, 6-CCB-210G, Aquaflow,IN-10, K2333, K3MFC201F,6ED27DQXFW01,6ED25DQXBW00,6ED25DQXFB.6ED25DQXVW00

Fridge Water Filter Spec:
Installation and replacement procedure for the Compatible External fridge water filter :

1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.

2. . Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.

3. Take the new filter, making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 10mm and you will feel it hit home.

4. Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remove any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.