Rainwater Household Mains Water Backup (Dual Water Source Control) Pump System for Flushing Toilets & Washing Machine.
It can now keep the garden green, lower the overall water usage (and water bill) and most importantly, contribute towards saving our most sacred resource water.

Design for the following area:

 Design for supply water from RainwaterTank for flushing toilets, laundry and garden irrigation systems, only using mains water as a backup when rainwater supply exhausted.

 Harvesting systems for tank to home applications. Pump capacity is enough for Large house, Double Storey with big garden(incorporated into the design of new homes, or retrofitted to existing properties),It is preferred by a number of leading builders and irrigation specialists.

Feature:

 Allows home owners to get the highest possible water savings from their rainwater tank. Ideal for above ground tanks of any size.Automatic switches to mains waterwhen tank runs dry or when power is off.

 Super Volume Capacity max: 5400L/Hr- Enough flow for using water at the same time (showering, washing mahcine and water gardening)

 Multistage pump - provide constant and high pressure water flows to improve the performance of your showers, faucets, washing machines and garden watering systems;

 The AcquaSaver Valve will always prioritize the use of rainwater over mains water when rainwater is available and will automatically switch over to mains water in the event of the rainwater tank running low or electrical failure.

 When rainwater has been replenished or power has been restored to the pump, the AcquaSaver valve will automatically prioritize back to rainwater.

 The pump is only active when rainwater is being drawn from the water tank, it does not operate when the AcquaSaver Valve has switched to mains position.

 The pump controller starts and stops the pump when it detects a demand for example flushing a toilet or using a washing machine.

 High graded Stainless Impellers;

 High graded Stainless Steel Motor Shaft;(duration and corrosion resistance)

 Dry run protection(controller monitors system pressure and flow and turns pump on and off automatically.When taps are either opened or closed, it adjusts the flow rate and pressure, keeping these constant.)

 Ceramic and graphite Mechanical Seal;

 Compact size - easy to install, operation and maintenance;

 Safety and reliability (Continues rated);

 Double protection, current and terminal protector;

 Technologically advanced - Quite in operation;

Motor Feature:

 Single phase

 Closed, externally ventilated

 Heavy Duty Motor housing (Lot better Ventilation than Plastic Housing) Won't get overheat even continuous running

 Insulation class: F

 Protection class: IPX5

 Duty: Continuously rated

 Current protector & terminal protection

Technical Specifications:

 Motor power rated: 900W

 4 stage pump(four impellers operating at the same time,lot more efficient and stable flow and pressure)

 Voltage: 240V

 Simple installation

 Frequency: 50Hz

 Ampere: 5.7A

 Electronic Fan Cooled & Anti-Rust Shaft

 Capacity max: 90L/min(6-8 taps rated)

 Revolution: 2850rpm

 Head: 45m

 Suction depth max: 8m

 Inlet and Outlet 25mm X 25mm

 Rating: Continuous

 Overall Dimension (cm): 40 X 16 X 20

 Comes with 12 Months Warranty